Microbe-Lift Bio-Pure NO3/NO4 pellets

Description

Microbe-Lift Bio-Pure NO3/NO4 pellets

Bio-Pure is a special filter material for media reactors, for the permanent reduction of nitrate and phosphate, in all saltwater aquariums.

Bio-Pure has an ideal colonization surface for bacteria and supports them as an organic carbon source in the growth and breakdown of unwanted nutrients. Nitrate and phosphate are included in a biomass containing e.g. safely removed from the aquarium via a skimmer.

Bio-Pure consists of PHB with a bioavailability of approx. 98% and is 100% biodegradable.

Microbe-Lift Bio-Pure NO3 / NO4 pellets advantages

Bio-Pure is a special filter material for media reactors
For the permanent reduction of nitrate and phosphate in all saltwater aquariums.
Bio-Pure has an ideal colonization surface for bacteria and supports them as an organic carbon source in the growth and breakdown of unwanted nutrients.
Nitrate and phosphate are included in a biomass containing e.g. safely removed from the aquarium via a skimmer.
Bio-Pure consists of PHB with a bioavailability of approx. 98% and is 100% biodegradable.

Tips

For PO4 values ​​below 0.1 mg, use max. 50 ml per 100 liters of water.
For PO4 values, use max. 0.1 mg. 100 ml per 100 liters of water.
Water the required amount of Bio-Pure in osmosis water for approximately 24 hours.
In the first days a slight cloudiness of the water may occur, this is normal and will disappear after a few days.
Provide sufficient foam in the immediate vicinity of the pellet filter.
For best results, use our ARKA Core Bio-Pellet Reactor.
Measurable results occur after about 1-2 weeks.

Dosage

Add 20-50 ml per 100 liters of water to a suitable biopellet reactor.

The dosage can be slowly increased to max. 100 ml per 100 liters.