Deltec protein skimmer 600i with controller
Suitable for aquariums with a volume of: 200 to 600 liters. …
Deltec protein skimmer 600i
The Deltec protein skimmer 600i is the replacement for SC 1351.
The Deltec Skimmer 600i has a newly developed emergency overflow. This prevents the skimmer from “boiling over” when the water level in the skimmer rises. This can happen, for example, because the feed pump stops and the water level in the sump rises. In addition, there may be problems with the air supply, e.g. due to a kink in the silicone hose. This allows the skimmer to “boil over” and the water rises so high that it is forced into the foam pot and the foam waste is flushed back into the sump. This leads to an extreme load on water. This is prevented by the emergency overflow.
Emergency overflow pipe and regulator pipe
The water level in the Deltec Skimmer 600i can be read from the emergency overflow line. In addition, the minimum and maximum markings help to optimize the water level. The ability to swap the emergency overflow line with the regulator tube allows the user to decide how the lines are arranged.
The Deltec Skimmer 600i is equipped with the Deltec pump DCC 2. This 24V DC pump can be operated via an eight-stage controller and can be optimally adjusted to the water level and water load. At the optimum level 3 (for most aquariums), with only 11 watts, approximately 500 liters of air are generated.
The ergonomic cylinder shape
Thanks to the ergonomic cylinder shape, the Deltec Skimmer 600i achieves the best results with
skimming. The shape of the skimmer does not run upwards. This allows the small air bubbles to rise unimpeded, they are completely saturated and only burst into the riser of the foam pot. From there, the skimming waste can be disposed of via a drain hose without having to lower the foam pot.
Hollow chamber floor
An additional innovation of the Deltec Skimmer 600i is the hollow chamber floor. This helps to dampen the sound even more, making the already quiet Deltec Skimmer 600i whisper-quiet. In addition, the water flows back through the hollow chamber floor. The water is discharged from the skimmer at the lowest possible point, leaving almost no bubbles flow into the aquarium.
Disassembly, dimensions and construction
The normal cleaning of the pump is very easy thanks to the simple and quick disassembly of the skimmer. Deltec Skimmer 600i can be assembled and disassembled without tools. Tests have shown that the pump can be removed from the skimmer in less than 20 seconds. The dimensions of the Deltec Skimmer 600i have been chosen so that they can be comfortably placed in a sump. Due to the large volume of the cylinder shape, a small base area is sufficient.
Suitable for aquariums with a volume of: 200 to 600 liters.
Power consumption: 11 watts at an air output of 500 liters per hour.
Sizes (LXWXH): 22 x 14 x 51 cm.
Pump: Deltec DCC 2.
Controller for adjustment to water level / load with eight positions.
Recommended water level in the sump: 15 to 25 cm.
Features of the Deltec Skimmer 600i.
Very efficient cylinder shape.
Safe due to the newly developed emergency overflow with water level indicator.
Whisper quiet due to a new hollow bottom.
Extremely low power consumption.
Quick and easy removal of the pump.
Variable adjustable pump.