Description
ATI Power Cone 200is (500-1000ltr)
Including external controller for adjusting the pump performance The new PowerCone combines a number of new technologies that have led to an extraordinary and unparalleled e …
ATI Power Cone 200is (500-1000ltr) / ATI PowerCone 200 iS DC
Includes external controller for adjusting pump performance
The new PowerCone combines a number of new technologies that have led to extraordinary and unparalleled efficiency.
The advantages of the PowerCone:
Conical construction
The PowerCone’s new conical body provides a softer compression as you climb the foam.
Very efficient pumps
This new generation pump shows a clear increase in air intake with a lower power consumption.
New construction
During use, the entire housing of the PowerCone is filled with fine bubbles, whereby maximum utilization of the reaction chamber is achieved. However, 100% of the water that comes out through the outlet is free of bubbles. This is ensured by the particularly large cross-section of the lower square parts of the PowerCones.
Silent operation
The multiple disconnection of the pump and the skimmer causes operating noises to be reduced to a minimum. The damper also prevents the creation of annoying suction noises.
Easy to use and maintain
The internal water level in the PowerCone can be easily and precisely adjusted by the smooth-acting rotary knob of the water outlet. This stepless adjustment makes it possible to have the skimmer skimmer wetter or drier.
Adjustable outflow
The water outlet can be placed on either the right or left side of the lower square construction element of the PowerCones. In addition, the outflow direction is freely adjustable.
Easy to clean
The foam pot can be effortlessly easily removed for cleaning. There are no annoying elements nearby that can make this difficult.
Processing
With modern production procedures (CNC production), only high-quality materials are used for the PowerCone.
Unparalleled price-quality ratio
The new pump technology of the PowerCone
The heart of the PowerCone skimmer series have been specially developed for these dispersator pumps that differ significantly from the current scum pumps on the market. Thanks to this new technology (patent pending), the PowerCone 250 has more than 2700 l / h of air intake with only 35 watts of consumption. In other words, now we can use only one pump instead of the 2-3 Sicce pumps, as we did before.
This massive increase in production is achieved through the application of new, partially protected, technologies.
The new technologies
Grid wheel instead of a needle wheel
One of the most important innovations is Gridrad. Due to the coupled up structure, the Grid wheel is just as stable as the previously known needle wheels. In contrast, a significantly higher performance is achieved with the special spatial grid structure through a surface that is considerably larger than with needle or wire wheels of the same dimensions.
The grid wheel thus combines the advantages of the high stability of the needle wheels with the significantly higher reach of these wire wheels. Having to replace wire wheels over time is a thing of the past.
Improved air valve
In principle, almost all air inlets are located near the water inlet where an air and water mixture is created in a ratio of 1: 1. The stronger the pump, the more air it draws. ATI wanted a high air intake with minimal use of electricity! They had to redesign the intake nozzle to provide maximum air output while maintaining minimal wattage. They came up with the vortex theory. As the pump draws in the water, it creates a vortex. The greatest negative pressure is in the center, or the eye of the storm. By placing the air inlet in the center of the pump opening, they saw a significant improvement in the air-water mixture to a whopping 1.5: 1.
The new squeegee also shows a suction strainer which can be completely disassembled for easy cleaning.
Optimized pump housing
Another important detail of this enormous increase in productivity is the, also specially developed, housing of the pump. Until now, the use of pumps that were originally intended for conveying water was often used. However, pumps for a “thinner” mix of air and water require different requirements from the pump housing than is the case with normal water. That is why the new pump is optimally adapted to current technology for thin air and water mixtures.
ATI Power Cone 200is (500-1000ltr)
ATI Power Cone 200is (500-1000ltr)
Specifications ATI Power Cone 200is Protein Skimmer Intern
ATI Power Cone 200is Protein Skimmer Intern
Suitable for aquariums from 500 to
